Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateTrusted Hardwood Floor Refinishing for Whitney Homeowners
If your hardwood floors have gone gray, dull, or scuffed along the traffic lanes, refinishing is usually the fix, and it costs far less than tearing the floor out. Hardwood floor refinishing in Whitney typically runs $1,800 – $5,000 for a 500 to 800 square foot project, and the written estimate sets the final price. Our technicians have up to 12 years of experience and work only on floors, so they read wear patterns, cupping and finish failure quickly. You get brand-name products from Shaw, Armstrong and Mannington alongside a professional install standard, all through one team. Call (833) 620-5226 to book your free estimate. We answer 24/7, fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Hardwood Floor Refinishing Service Includes
Refinishing is not one process. It’s a set of steps, and which ones your floor needs depends on its condition. Here is what each part of the job covers and when it makes sense.
Hardwood Floor Sanding
Sanding removes the old finish and a thin layer of the wood surface so the floor comes back to bare, even wood. You need it when the finish is worn through in patches, when there are deep scratches, or when water rings and dents won’t come out of the top coat. We sand in stages with progressively finer grits, use dust control equipment, and check the surface between passes so the wood stays flat and the grain stays even. The number of passes depends on how thick the wood is and how the old finish behaves.

Hardwood Floor Staining
Staining sets the color of the floor once it’s sanded. It’s the step that makes new wood and old wood match, or that moves a reddish oak floor toward a cooler, more neutral tone. We apply stain and wipe it evenly across boards, then seal it, because patchy stain shows more under light than most people expect. Color is chosen in person at the estimate, where you can see how it reads against your trim, cabinets and natural light. An exact match to a sample or to another room depends on the wood species and its condition.

Hardwood Floor Restoration
Restoration covers the whole job: sanding, repairs, staining, and a fresh finish, plus the small things that keep an old floor sound. It’s the right path when floors are worn but the wood itself is still thick enough to be brought back. We handle loose boards, minor gaps and finish buildup, and we tell you honestly at the estimate visit whether the floor has enough wood left to refinish or whether refinishing won’t hold. Keeping the original floor saves money over replacement and keeps the character of the home intact.

Hardwood Floor Buffing
Buffing is a light surface treatment that knocks down dullness and small scuffs without taking the floor down to bare wood. It makes sense when the finish is intact and only the top layer looks tired. We scuff the surface evenly, clean it, and apply a fresh coat so the sheen returns without the cost of a full sand. If the finish has worn through to bare wood in places, buffing won’t fix it, and we’ll say so.
Screen and Recoat Hardwood Floors
A screen and recoat, sometimes called a scuff and coat, lightly abrades the existing finish and adds a new top coat over it. It’s the maintenance step that buys years before a full sand is needed. We check adhesion first, since a recoat only works if the existing finish is bonded and clean. Where the finish is flaking or lifting, a full refinish is the better call, and we’ll explain the difference plainly.
Stair Refinishing
Stairs take more wear than any hallway and are usually the hardest part of a refinish to get right. We sand treads, risers and rails to match the floor, paying attention to nosing edges where finish lifts first. Stair work is scheduled with the floor so the color and sheen match as closely as the materials allow.
Styles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
Brands We Service for Hardwood Floor Refinishing
Refinishing is done on the wood that’s already in your home, but the finish and coating systems we use sit alongside the flooring products we supply, and we know how those products behave. Mannington and Armstrong both make engineered and solid hardwood floors that get refinished only when their top layer allows it, so at the estimate we check the wear layer and tell you whether sanding is safe or whether a screen and recoat is the right move. We don’t guess at this step; too much sanding on a thin wear layer is how floors get ruined.
For homes where part of the floor is tile or where a room is being added, Daltile and Karndean cover the hard surfaces that sit next to your hardwood, and we keep the transition heights and expansion gaps consistent across the whole job. Whether you have Mannington, Armstrong or any other make under foot, we can help you work out the right refinishing path and the coating that belongs on top of it.
Signs You Need Hardwood Floor Refinishing Right Now
- Gray or milky patches along walkways. This is usually the finish worn through to bare wood, and bare wood picks up moisture and dirt fast. Refinishing now keeps the damage at surface level instead of in the grain.
- Deep scratches you can feel with a fingernail. Surface scuffs are cosmetic, but scratches that catch mean the protective layer is gone in that spot. A screen and recoat handles the light version; sanding handles the deep one.
- Water rings, dark stains or black spots near a sink or entry. Dark spots can mean moisture has worked below the finish. We check how deep it goes, because a stain that has moved into the wood needs different treatment than one in the coat.
- Cupped or lifting edges between boards. Cupping points to moisture from below or from the room, and refinishing before the source is addressed just hides it. We look at the cause first, then plan the repair and the refinish together.
- Dullness that comes back weeks after cleaning. When polish no longer holds a shine, the finish itself is failing rather than dirty. That’s the point where a recoat or full refinish saves the floor.
Our Hardwood Floor Refinishing Process – Step by Step
- 1
Free in-home measure and floor assessment. We walk the space, map the wear patterns, check floor thickness and how many refinishes the wood has already had, and test for moisture. You get a written estimate the same visit, and we tell you if refinishing won’t hold and replacement is the honest answer.
- 2
Preparation and protection. We move what needs moving, seal off adjacent rooms, and set up dust containment. Baseboards and trim get protected, and any loose boards, squeaks or gaps are fixed before sanding starts.
- 3
Sanding in stages. Coarse to fine grits, with the surface checked between passes. Edges and corners get the same treatment as the field of the floor, because a floor that’s flat only in the middle shows it in raking light.
- 4
Stain and seal. Color goes down evenly and gets wiped back, then the sealer and top coats are applied with the right dry time between them. Coating in the wrong order or too soon is the most common cause of a finish that peels.
- 5
Final inspection and walkthrough. We check sheen, color and edges with you, explain how to care for the floor in the first weeks, and leave a written record of the products used. You know exactly what’s on your floor and how to keep it there.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Hardwood Floor Refinishing Cost in Whitney?
A typical hardwood floor refinishing project in Whitney runs $1,800 – $5,000 for 500 to 800 square feet, and refinishing starts from about $3 per square foot. That’s the general range; the written estimate sets the final price.
| Scope | Typical estimated range |
|---|---|
| Screen and recoat (finish intact) | Lower end of the refinishing range |
| Full sand, stain and finish | $1,800 – $5,000 |
| Stair refinishing added | Quoted with the floor |
| Floor repair before refinishing | $250 – $1,500 per job |
What pushes a Whitney job up or down: square footage, how many coats and what type of finish you choose, how much stain and repair work is needed, and how many rooms are involved. Stairs, tight corners and heavy furniture moving add labor. Desert conditions matter too – our dry air and big temperature swings between seasons can leave gaps in the boards, and the estimate visit is where we plan for that rather than discovering it mid-sand.
To avoid overpaying, get the estimate in writing with the number of coats and the product listed. A vague “refinish floors” line is where extra charges appear later. Our estimates are free, itemized, and no-obligation, and you’ll know before we start whether refinishing or a recoat is the right spend.
Hardwood Floor Refinishing Near Whitney – Our Service Area
We work across the east valley and beyond, including Whitney, Henderson, Enterprise, Sunrise Manor, Paradise, Winchester, Spring Valley, North Las Vegas, Las Vegas, Summerlin, Boulder City and Sandy Valley. Distance affects scheduling rather than price, so the estimate visit is booked first and the floor work goes on the calendar once you approve the written quote. If you’re comparing options, our team at Whitney Flooring can walk you through what refinishing involves, and you can also see how we handle Henderson and Enterprise homes for the same kind of work.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Hardwood Floor Refinishing in Whitney
Hardwood floor refinishing is sanding off the old finish and a thin layer of wood, then staining and sealing it to restore the floor. It’s a surface restoration, not a replacement, so you keep the original wood and its character. A screen and recoat is a lighter version for finishes that are still bonded. Call (833) 620-5226 to set up a free estimate and find out which one your floor needs.
The schedule is set at the estimate, since square footage, how many rooms and how many coats decide it. Sanding and coating happen in stages with dry time between them, and you can’t walk on the floor while it cures. We plan the calendar around your move-out of the rooms, and the written estimate gives you the full picture. Call (833) 620-5226 to discuss timing.
Typical installed prices for a 500 to 800 square foot project in Whitney run $1,800 – $5,000, with refinishing from about $3 per square foot. The final number depends on square footage, finish type, stain work, repairs and stairs. The written estimate sets the price, and it’s free. Call (833) 620-5226 for an exact quote.
Yes, we refinish and recoat Mannington and Armstrong hardwood floors, along with other makes. Engineered floors with a thin wear layer may not be safe to sand, so we check the layer at the estimate before committing to a full sand. Where a full sand isn’t right, a screen and recoat is often the answer. Call (833) 620-5226 to have your floor checked.
Same-day visits are sometimes possible, depending on the schedule, and the work itself is a booked job after your free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 620-5226 to get on the schedule.
Warranty terms are set out in your written estimate, and they depend on the products used, so we don’t give a blanket promise here. What we can tell you is what products go on your floor and how to care for them, which is what protects the finish. Ask about it at the estimate visit. Call (833) 620-5226 to book one.
Clear the rooms of furniture, breakables and anything hanging on walls in adjacent spaces, and plan for foot traffic to avoid the floor while it cures. We protect baseboards and seal off other rooms with dust containment, but a clear path in and out helps the job move faster. Pets should be out of the work area during sanding and coating. Call (833) 620-5226 and we’ll walk you through the setup for your home.
Schedule Your Hardwood Floor Refinishing Service in Whitney Today
If your floors are dull, scratched or showing bare wood, refinishing can bring them back for a fraction of replacement, and our team handles the sanding, staining and coating with brand-name products. Call (833) 620-5226 to schedule your free, no-obligation estimate in Whitney. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Start with Whitney and let us price the job in writing before you commit to anything.
Written by the team at Whitney Flooring.